How to count respiratory rate by hand

Four ways to get a breathing rate without a monitor: a full minute, 30 seconds doubled, 15 seconds multiplied by 4, or tapping once per breath. What each involves, and what one published study found.

Four ways to count a breathing rate

Respiratory rate is the number of breaths in a minute. Without a monitor, the usual ways to get it are these.

  • A full minute. Watch the chest and count every breath you see for 60 seconds. The number you count is the rate in breaths per minute.
  • 30 seconds, doubled. Count for 30 seconds and multiply by 2. Nine breaths in 30 seconds is a rate of 18 breaths per minute.
  • 15 seconds, multiplied by 4. The same idea over a shorter window. Nine breaths in 15 seconds is a rate of 36 breaths per minute, so each breath you miss or add moves the answer by 4.
  • Tap per breath. Tap once for every breath you see and let an app time the gaps between your taps. No stopwatch and no multiplying.

Every one of these depends on how carefully you watch each breath. Which count you use is set by your training, your workplace or your service's guidance. This page doesn't tell you which to use.

30 seconds times 2, or a full minute?

The arithmetic is the same, but the answers are not always. In a published study of 770 readings from 321 acutely ill adult ward patients, counts over 30 seconds were compared with counts over a full minute. They were off by an average of 0.46 breaths per minute, with limits of agreement, the spread that most readings fell within, from -3.89 to +2.97. Counts over 15 seconds were off by an average of 1.22, with limits from -7.16 to +4.72.

The authors also looked at readings that scored 3 early warning points when counted over a full minute. Half of those were not identified by the 15 second count and a quarter were not identified by the 30 second count. They concluded that shortcuts often fail to identify sick patients.

Rimbi M, Dunsmuir D, Ansermino JM, Nakitende I, Namujwiga T, Kellett J. Respiratory rates observed over 15 and 30 s compared with rates measured over 60 s. QJM. 2019;112(7):513-517. doi.org/10.1093/qjmed/hcz065

That is one study of adult ward patients. The other studies, including those of tapping, are summarised on the evidence page.

Tap per breath

  1. Watch the chest. Tap once for every breath you see. The first tap is breath one.
  2. The app times the gaps between your taps and uses the median gap, the middle value, so one mistimed tap does not wreck the reading. It converts that gap to breaths per minute.
  3. A rate appears from the second tap and sharpens with every tap after it. Keep tapping until the confidence indicator reads Confident.

The method was described by Karlen and colleagues in 2014 with the RRate app. Rythmo is written from that published description. The confidence indicator shows how consistent your taps are. It is not a measure of clinical accuracy.

Karlen W, Gan H, Chiu M, Dunsmuir D, Zhou G, Dumont GA, Ansermino JM. Improving the accuracy and efficiency of respiratory rate measurements in children using mobile devices. PLoS One. 2014;9(6):e99266. doi.org/10.1371/journal.pone.0099266

Rythmo is a free tap-per-breath app for iPhone, Apple Watch, Android, Wear OS and Garmin. You can also try the same engine in your browser, tapping along with anything that repeats, on the apps page. Nothing you tap there is sent anywhere. The Rythmo apps themselves have not been tested against a reference standard. The published evidence is for the method, not for these apps.

The Rythmo apps

How breathing rate apps compare

Questions

Is counting for 30 seconds and doubling it the same as counting a full minute?

The arithmetic is the same, but the answers are not always. In a published study of 770 readings from 321 acutely ill adult ward patients, 30 second counts were off a full minute count by an average of 0.46 breaths per minute, with limits of agreement from -3.89 to +2.97 (Rimbi et al, QJM 2019). That was one hospital in Uganda, and shorter counts tended to read low, so treat it as a guide. Your training or your service's guidance decides which count you use.

How do you count respiratory rate with an app?

With a tap-per-breath app you tap once for every breath you see. The app times the gaps between your taps, takes the median gap and converts it to breaths per minute. A rate appears from the second tap and sharpens with every tap after it.

Do I need a stopwatch to count respiratory rate?

For a timed count over 15, 30 or 60 seconds you need a clock. With tap per breath you do not: the app times the gaps between your taps.

Is there a free app for counting respiratory rate?

Yes. Rythmo is a free respiratory rate counter app for iPhone, Apple Watch, Android, Wear OS and Garmin, with no in-app purchase and no account.

Disclaimer

Rythmo is a reference and training tool. It reports a rate calculated from your own taps and displays published reference ranges for comparison. It does not diagnose, does not decide treatment, and does not replace your clinical assessment. Confirm every reading before you act on it or document it.

For medical advice, diagnosis or treatment, consult a qualified healthcare professional.